Introduction

Table of contents: 1. Introduction of bimetallic trap 2. Working principle of bimetallic steam trap 3. Improved designed bimetallic trap: Invert disc valve 4. Modified design bimetallic trap: Multiple prongs type 5. Practical limitations in trap operation 6. Advantages of the bimetallic steam trap 7. Disadvantages of the bimetallic steam trap 1. Introduction to Bimetallic Trap: Bimetallic trap is classified ...

Balanced Pressure Trap: As discussed in my previous post Balance pressure trap is classified under temperature operated traps. Due to robust design of the internals balance pressure steam trap has a good life expectancy.  Balanced Pressure is an improvement on the Liquid Expansion Thermostatic Trap in the sense that the above Trap is self-adjusting to varying operating steam pressure conditions within its designed ...

Liquid Expansion Trap: As discussed in my previous post liquid expansion trap is classified under temperature operated traps. Liquid Expansion Trap one of the simplest designs amongst Thermostatic type of Traps. The accompanying sketch (refer Figure-1, Exhibit 34.6) below shows the constructional features of a Liquid Expansion Trap. Figure-1 (Exhibit 34.6) It consists of an oil filled flexible thermostatic element ...

Inverted Bucket Steam Trap: As mentioned in my previous post the inverted bucket steam trap is a mechanical trap classified as a density operated steam trap which operates on the difference in density between steam and water. The accompanying sketch below shows the constructional details of an Inverted Bucket Trap. As the name implies the working portion of the Trap ...

Steam Trap Types: Based on the working principle of the Steam Trap can be classified as follows: Density Operated Steam Trap: Ball Float Inverted Bucketed Temperature Operated (Thermostatic) Steam Trap: Balanced Pressure Liquid Expansion Bimetallic Kinetic Energy Operated Steam Trap: Thermodynamic Impulse or Orifice Ball Float Steam Trap:  The Ball Float Trap works on the principal of sensing the difference ...

As I mentioned in my earlier post regarding about Steam Trap, while selecting a steam trap the most important data required is the condensate load. This data is generally provided by the process department but as a piping engineer too should be in a position to estimate the condensate loads initially. The selected steam tarp shall be functionally at the ...

Introduction: Steam is perhaps one of the most efficient mode of energy transportation in the present times in Process Industry. However it has a potential of becoming highly inefficient if certain aspects associated with its handling are not appropriately addressed in the design of steam network. The aspects, which are of particular concern with respect to efficient and safe design ...

Table of contents: 1. Functions of flame arrestor 2. Concept of the flame arresters 3. Operating limits for a flame arrester 4. Guidelines in Selecting flame arrester 5. Flame Arrester construction type 6. Types of flame arresters 7. Approvals and Certifications Flame Arrester (also spelled as Flame Arrestor) is a device fitted to the opening of an enclosure or to ...

Introduction to Flush Bottom Valve Flush Bottom Valve  is a special purpose valve, which is used in piping, reactors and vessels to drain out abrasive, Slurry, Viscous Material or Semi Solid Media. This type of valve is available in the size from 15 MM to 150 MM with different material of construction like Cast Iron, Cast Steel, SS 304 / 316 ...

Introduction to Multi-port Valve Valves which perform duties other than the two way isolation, control and check are classified under the category of special purpose valves, few of such valves are Multi-port valves. Flush bottom valves Float valves Foot valves Multi-port Valves Multiport valve is categorized as a special purpose valve. The multi-port valve on certain services reduces the time for ...